|
|
Post by Martin on Jun 15, 2023 14:05:58 GMT
Bike doesn't have spark, took some stator readings today. Anything I can do or is it twatted? Thanks for any replies. |
|
|
|
Post by marktrower on Jun 15, 2023 14:54:41 GMT
Your looking at 40 year plus parts secondhand are the same best is to send everything to rex speedshop they will tell you what is needed and the cost but in the end you will have a system that is good for 40 year and more
|
|
|
|
Post by buster on Jun 15, 2023 19:52:44 GMT
looks like the low speed source coil is cabbaged, for the sake of £115 for the full rewind you might as well get the whole thing done for peace of mind. as Mark's said
|
|
|
|
Post by Martin on Jun 15, 2023 20:04:05 GMT
Thanks for replies guys. I’ve been having a look at this lads YouTube channel, very interesting stuff and he does the rewinds as well. youtu.be/MglPhj30syM |
|
daveh
Full Member
Posts: 417
|
Post by daveh on Jun 16, 2023 10:56:50 GMT
looks like the low speed source coil is cabbaged, for the sake of £115 for the full rewind you might as well get the whole thing done for peace of mind. as Mark's said I was quoted around £300 by Rex for a full rewind! |
|
|
|
Post by paulpg36 on Jun 16, 2023 13:24:11 GMT
looks like the low speed source coil is cabbaged, for the sake of £115 for the full rewind you might as well get the whole thing done for peace of mind. as Mark's said I was quoted around £300 by Rex for a full rewind! Now that I have finally managed to remove my stator, I am in a position to either send it to Rex for no doubt a full rewind although not keen to pay £300 or try and source a replacement. I think I managed to damage it (thanks Bojer!) getting it out as black plastic bits were falling off it. I have found another rewinding service for £125 plus any repairs necessary - see link www.ebay.co.uk/itm/204345017781 I have been looking in ebay and there are a couple of used stators which may need rewinding therefore not keen. I have come across a new supposedly compatible one in China for about £106 and I was wondering whether anyone has gone down this route and if so, do they work? I have tried to copy the link a few times but it just won't work but the item number is 185237567179 if anyone is interested in having a look. |
|
|
|
Post by Martin on Jun 16, 2023 14:26:17 GMT
I’m thinking I may give this guy a try. It’s his video I posted above. Looks like it’s £109 for repair on his website. He’s on eBay as well. www.bbbikeshop.co.uk/ |
|
|
|
Post by paulpg36 on Jun 16, 2023 14:32:15 GMT
I’m thinking I may give this guy a try. It’s his video I posted above. Looks like it’s £109 for repair on his website. He’s on eBay as well. www.bbbikeshop.co.uk/This is the same guy as I posted below. |
|
|
|
Post by buster on Jun 16, 2023 17:26:48 GMT
I'm assuming its a 250? going by the figures in the photo.
I was under the impression the 250's were about £115 ish for the full rewind
rex's havent got confused and think its a 400?
|
|
|
|
Post by buster on Jun 16, 2023 17:31:24 GMT
|
|
|
|
Post by paulpg36 on Jun 16, 2023 17:48:20 GMT
Thanks for the warning Buster as that was what I was looking at and it did seem rather cheap. I suppose there's always CMS for £460 or £800+ including the flywheel, maybe even get free postage for that! I don't think so. |
|
daveh
Full Member
Posts: 417
|
Post by daveh on Jun 16, 2023 20:12:32 GMT
I'm assuming its a 250? going by the figures in the photo. I was under the impression the 250's were about £115 ish for the full rewind rex's havent got confused and think its a 400? I sent my stator, CDI and coil to Rex's with the reading I got so they knew what it was. They said it failed and needed a rewind ar 300 quid plus recommended the high speed pick be replaced at another 65 quid. On the plus side the testing was FOC and they were very helpful and sent it back quickly. I bought a used one from 'living the dream' on ebay and it is working OK. £105 seems a good price and would have gone for that if I had known as 2nd hand cost me £75! I might be tempted to send my spare one to them to get done at that price. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 16, 2023 20:43:57 GMT
I was quoted around £300 by Rex for a full rewind! "I think I managed to damage it (thanks Bojer!) getting it out as black plastic bits were falling off it. " What's that mean ?! |
|
|
|
Post by buster on Jun 16, 2023 21:15:53 GMT
I'm assuming its a 250? going by the figures in the photo. I was under the impression the 250's were about £115 ish for the full rewind rex's havent got confused and think its a 400? I sent my stator, CDI and coil to Rex's with the reading I got so they knew what it was. They said it failed and needed a rewind ar 300 quid plus recommended the high speed pick be replaced at another 65 quid. On the plus side the testing was FOC and they were very helpful and sent it back quickly. I bought a used one from 'living the dream' on ebay and it is working OK. £105 seems a good price and would have gone for that if I had known as 2nd hand cost me £75! I might be tempted to send my spare one to them to get done at that price. looks like I'll have to do a DC CDI conversion for the 250's too, bit of extra expense though cos the 400 mag wheel is the one to work with and I'd need a 250 to mess about with... is that a great excuse to get another bike or what? |
|
|
|
Post by paulpg36 on Jun 17, 2023 7:57:42 GMT
"I think I managed to damage it (thanks Bojer!) getting it out as black plastic bits were falling off it. " What's that mean ?! Hi Bojer. What I meant was thanks for the warning when you said "I would be v wary of locking up the flywheel against the generator windings like that" as it came true although I had already damaged it by then. Also, after your prophetic comment, I was doing it a different way. Paul |
|
