|
Post by mik25nik on May 17, 2017 15:42:51 GMT
Hi All
Where do you buy your throttle cables from and do they fit.
Just purchased a pair from EBay 1. the throttle opener is fine the other is too long, email enquiry informed me they sell them as pair and do not offer another cable for Superdreams.
Ordered one from Wemoto and again the inner is 25mm two long.
So my question is who can supply throttle cables that do the job
Then had a thought! 59years ago when I started with bikes and throttle cables broke you could re-solder the nipple on again, re-tin the inner cable splay out the end and sweet it back in again, usually had to peel a bit of the outer cable away and job done.
Nothing to lose so put an old cable in vice out with blow lamp started warming the end and! yes you already know don't you? alloy nipple and it fell apart.
Oh for the good old days.
Regards
Mike
|
|
|
Post by stevie on May 17, 2017 16:35:59 GMT
You can buy cable nipples off the bay.
|
|
danrush4th
Full Member
Enter your message here...
Posts: 482
|
Post by danrush4th on May 17, 2017 16:59:06 GMT
I have a tsk pull cable which with a fair bit of slack taken out of it works good, which is a nice surprise because the last couple of pattern pull cables I tried where way too long even fully adjusted. As for the push mine had an original Honda one on but it seemed a little stiff so I've actually just done away with it all together you could do that. Good pattern throttle cables have been a problem with these bikes for a long time.
|
|
ian
Member Of The Year 2019
Isle of Man
Posts: 5,400
mini-profile background: {"image":"","color":"29908d"}
|
Post by ian on May 17, 2017 20:45:33 GMT
I've taken the push cables off all my SDs, and my CB500R, but if you want to keep one on, I could send you one of my discarded cables when I get back from Derbyshire if you pm me your address.
|
|
|
Post by mik25nik on May 18, 2017 18:06:24 GMT
Thanks to all replies.
But I have ordered a bag of nipples off EBay and will adjust the long one.
Many thanks
Mike
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 18, 2017 18:15:21 GMT
you can tin it to cut cable to length or if you have a good pair of bolt cutters they do a nice clean cut
|
|