|
|
Post by adelee on Apr 24, 2017 20:46:47 GMT
Thinking of doing away with my old bottles and tubes and treating myself to a power bleeder.
Any of you guys have one,any recommendations?
Cheers.
|
|
|
|
Post by srx600 on Apr 25, 2017 8:25:48 GMT
cool idea...
Is this oil or brake fuel, guess this system would do both...
|
|
|
|
Post by adelee on Apr 25, 2017 19:24:07 GMT
cool idea... Is this oil or brake fuel, guess this system would do both... I know you can get them that force fluid through the bleed nipple rather than down from the master cylinder, apparently they are better at getting rid of air due to forcing the air upwards rather than downwards. Being the tight git that I am, I have sourced a large syringe which should do the same job,I hope. |
|
|
|
Post by srx600 on Apr 26, 2017 8:52:14 GMT
Just get a vacuum brake bleeder. After struggling with the six pot brakes on the zx7r for a few years
& thinking, I had done a good job. Only to realise otherwise after one of my mates rode it and the brakes scared him to death!
I got one and never looked back. They just kick this job into the grass no problem..
|
|
|
|
Post by listey on Apr 26, 2017 10:29:39 GMT
|
|
|
|
Post by yan1114 on Apr 26, 2017 14:28:53 GMT
|
|
|
|
Post by adelee on Apr 26, 2017 15:10:20 GMT
Good suggestions and ideas thanks guys.
The problem i`m having is bleeding the clutch on the magna, i`ll try the syringe with tubing fastened around it and the bleed nipple,see how I go on.
Will let you know how it goes.
|
|
|
|
Post by srx600 on Apr 27, 2017 9:06:13 GMT
cheap works for me ever time ...
|
|
|
|
Post by adelee on Apr 30, 2017 14:44:41 GMT
|
|
