|
Post by Mike1962 on Feb 19, 2017 20:14:43 GMT
Hi Well...... I think it's about ready, a couple of final things before I book it in and drive over.... 1 Is there a checklist on here somewhere to double check you've covered everything prior to the MOT ? 2 Does the actual running of the engine count? It starts on the button, practically ticks over with hardly any choke when cold, then when warm will tick over no bother, but is REALLY RELUCTANT to rev through the range. It really hesitates at about 3,000 - 4,000 RPM then goes again at about 5500+ RPM. The test station is about 3 mile away so I can get there but....... will this knock me out of a pass certificate? Cheers
|
|
|
Post by Mike1962 on Feb 19, 2017 20:17:03 GMT
no idea what is happening with my computer tonight but this is my third attempt at putting these q's online .......
My last request was ........ if anyone spots anything after looking at the photos please let me know.....I have broad shoulders and a thick skin............ I await your advice..........
|
|
|
Post by Mike1962 on Feb 19, 2017 20:23:03 GMT
.... promise....one last question....... one of the engine mounting bolts (head and nut) on the lower front bracket were sheared off by the previous guy too........ if I paint them black and pretend all is good, is that ok too for the test if they aren't noticed just at the moment they kind of stand out as he has sheared them off, then tried to drill them, then just bloody left them!
Then I can do them at my leisure.....
Cheers
Mike
|
|