Post by upchurch on Jan 6, 2017 16:06:37 GMT
Exhaust Manifiold Studs
Hi
If 'push comes to shove' it is possible to use Studdings as a
sustitute for Exhaust Manifold Studs.
The cheapest form of Studding that I have found is M6x80 Setscrews
sold by 'SCREWFIX'. (50 pack bought today cost £2.53) Stock Clearance
It is necessary to cut the Screw to length.
Normally 60mm length if sufficient, but this should be checked.
Put oil on the Thread before screwing in to the engine block.
Tighten up using M6 Nuts. (10 mm Spanner)
(Put oil or grease on that part of the Thread also)
Wilf
Hi
If 'push comes to shove' it is possible to use Studdings as a
sustitute for Exhaust Manifold Studs.
The cheapest form of Studding that I have found is M6x80 Setscrews
sold by 'SCREWFIX'. (50 pack bought today cost £2.53) Stock Clearance
It is necessary to cut the Screw to length.
Normally 60mm length if sufficient, but this should be checked.
Put oil on the Thread before screwing in to the engine block.
Tighten up using M6 Nuts. (10 mm Spanner)
(Put oil or grease on that part of the Thread also)
Wilf