REPAIRING SUPERDREAM BLOWING EXHAUST USING A REPAIR SCROLL
Jan 4, 2017 7:12:36 GMT
stevegbr likes this
Post by upchurch on Jan 4, 2017 7:12:36 GMT
TIN PLATE "EXHAUST REPAIR SCROLL"
Hi
It is possible to repair a Blowing Exhaust Downpipe and Silencer using a
Tin Plate Scroll held in position by Jubilee Clips.
I recently used a small 227 gram Sainsburys 'Pineapple Pieces' Can to make such
a repair.
Here's How:-
Open the Can at both ends,then cut at right angles.
This gives you a Scroll.
Offer the Scroll up to the Blowing Area and estimate length required.
Cut to length required.
Have 2 Jubilee Clips of correct size available.
Make sure the Jubilee Screw is on the inside,then tighten up.
This makes a sucessful repair.
This same Technique can be used on the 'Tapered' part of the Silencer
using a larger can.
Regards
Wilf
Hi
It is possible to repair a Blowing Exhaust Downpipe and Silencer using a
Tin Plate Scroll held in position by Jubilee Clips.
I recently used a small 227 gram Sainsburys 'Pineapple Pieces' Can to make such
a repair.
Here's How:-
Open the Can at both ends,then cut at right angles.
This gives you a Scroll.
Offer the Scroll up to the Blowing Area and estimate length required.
Cut to length required.
Have 2 Jubilee Clips of correct size available.
Make sure the Jubilee Screw is on the inside,then tighten up.
This makes a sucessful repair.
This same Technique can be used on the 'Tapered' part of the Silencer
using a larger can.
Regards
Wilf
yes...