|
|
Post by srx600 on Nov 10, 2015 8:08:51 GMT
Hi can you still get NOS honda keys for the bike as I have not seen any..guessing you can. Cant remember if they had a bit of plastic on them or where just metal..
The key I have is just metal, but sure the keys for my first superdream had the plastic...
|
|
|
|
Post by srx600 on Nov 10, 2015 8:12:36 GMT
Key blank, type 2
A Genuine key blank to have your original replicated. Please note there are 2 types, this type 2 is for key numbers starting with either the letter C or D.
In cases when your key number does not start with letters A, B, C or D, carefully compare your original to the 2 types, the cut in the face of the key blade is either on the Left or Right hand side. Make your selection from either type 1 or type 2.
TypeGenuine PartPart No
35122KW3771
35122-KW3-771
Price£6.95
(£8.34 inc vat EU)Approx€ 9.76 | $ 10.51
¥ 1293.12Quantity
1
Stock10+ in Stock - Usually ships in 48 hours
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 10, 2015 9:16:52 GMT
Not strictly NOS as I think the keys probably had more part number updates than anything else- but good to get one with "Honda" on. Originals were like the photo of the lockset Nick put up the other day inviting comments. That's why it was such a good find- 2 original design keys.
I thought SD keys were the "Type 1", or at least all the ones I have here are that handed?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 10, 2015 22:23:17 GMT
|
|
|
|
Post by srx600 on Nov 11, 2015 6:56:29 GMT
Yes that's the very same key I need
|
|
|
|
Post by bendys on Nov 11, 2015 11:02:51 GMT
Unfortunately, "locks only keep the honest people out" I was taught when i was a kid. But then i was also taught to "treat other peoples property as you would your own". Any competent locksmith will be able to make the 3 barrels the same, or cut a blank to suit the supplied barrels, or match 3 barrels for a given key. Have a search on lock picking on the net. You might be able to do it yourself. The stainless steel rod in a set of old wind screen wipers work well.  |
|
|
|
Post by wazzbo on Nov 11, 2015 13:47:35 GMT
These might be of help to you   Courtesy of crouchyuk Dave.. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 11, 2015 13:53:24 GMT
Well remembered Dave!
Yes done a few re-keys now, it's worth dismantling and keeping those brass tumblers/blades from knackered locks as there is only 8-9 different lengths and you can mix 'n match to get a usable combination....
|
|
|
|
Post by wazzbo on Nov 11, 2015 13:54:42 GMT
I was hoping it was you I got them from Paul, the memory isn't as good as it was.lol
Dave..
|
|
|
|
Post by srx600 on Nov 11, 2015 16:53:02 GMT
cant get the barrel out of the helmet lock lol
|
|
|
|
Post by wazzbo on Nov 11, 2015 20:22:19 GMT
You don`t need a key to get the barrel out Chris, if you look at the pic of the back of the barrel you`ll see a tab on the opposite side of the barrel to where the raised pin is.  you need a small screwdriver or something with a narrow point to prise the tab towards the barrel, it pushes in flush with the barrel  when you have pushed it in flush, press down on the back of the barrel and it should push out, you might need to oil it up a bit or spray it with wd40 if it hasn`t been used for a long time. you can see the tab I mean on this pic, its the one nearest the back of the barrel.  I hope you can see from the pics what I mean but if you need any help just give me a shout |
|
|
|
Post by srx600 on Nov 11, 2015 20:51:49 GMT
Beliveve me I've been poking and proding all day and got no where!!!!
Lol! I tried with the key, without the key.Oh, How did you reassemble the helmet lock?
|
|
|
|
Post by wazzbo on Nov 11, 2015 20:58:43 GMT
I haven`t reassembled it yet , I fitted a nos one, But I intend to sometime before next spring as the new one I got from cms has a smaller barrel and a crappy small steel key so I couldn`t match its barrel with my original keys.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 11, 2015 21:23:38 GMT
Beliveve me I've been poking and proding all day and got no where!!!! Lol! I tried with the key, without the key.Oh, How did you reassemble the helmet lock? They can't be that hard as I have re-assembled two now.....the last one from SBY back in May - took it apart to replace the rusted locking bar for a nice shiny looking one. |
|
|
|
Post by wazzbo on Nov 11, 2015 21:45:25 GMT
Thats what I intend to do Nick, I`m going to strip the crappy nos one thats on my na now and rob the shiny new locking bar from it an put it in the original lock.
|
|
