|
|
Post by jonnyboy on Sept 25, 2014 18:42:02 GMT
i am not sure if i have asked this question before but is it possible to use one caliper from a 400 s/d on a 250s/d? or are they different sizes?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 25, 2014 19:37:24 GMT
Totally different Johnny.
Remember - the single disc on the 250 was a bigger affair.
|
|
|
|
Post by jonnyboy on Sept 25, 2014 19:48:39 GMT
Thank for your reply i thought i had asked this before but it may have been on the "dark side"....hee hee any no i know!
|
|
|
|
Post by na44superdream on Sept 25, 2014 21:44:52 GMT
To use on the CB250N with it's 276mm Disc...
The CB400N single pot caliper would have to be fitted with a CB750 /CB900F Caliper hanger bracket.
The CB400NC twin pot would have to be fitted with an XBR 500 caliper bracket.
|
|
|
|
Post by jonnyboy on Sept 25, 2014 21:48:16 GMT
Thanks for that, so it can be done then?
|
|
|
|
Post by rich on Sept 29, 2014 11:15:22 GMT
cx500??
|
|
|
|
Post by na44superdream on Sept 29, 2014 18:58:34 GMT
The CX500 also has 240mm discs I think, so would need the CB750F/CB900F hanger . To put a single 240mm disc and Nissan Caliper on the CB250N would only give the braking capacity of the CB125. As the CB250N has only adequate braking with the 276mm disc  ! |
|
!