|
|
Post by dominykaslt on Sept 13, 2014 16:13:09 GMT
Hello again guys, from the first day I am taking advantage of this friendly forum and have another question  Gas started to leak from the carburetor hose, I put out the hose screw, then put it in again, tightened and it helped for around 20 miles, but it started leaking again. By leaking I mean flowing constantly. What could be the problem? Bad screw or maybe some kind inside rubber parts? Thanks a lot in advance! Dominykas |
|
ian
Member Of The Year 2019 
Isle of Man
Posts: 5,407 
mini-profile background: {"image":"","color":"29908d"}
|
Post by ian on Sept 13, 2014 19:29:28 GMT
Presume you mean the overflow/drain tube from the bottom of the carb. Could be dirty float needle valve. FB's done a nice replacement guide here:- honda-superdream.co.uk/thread/429/quick-carb-needle-replacementNext time it leaks, tap the float bowl a couple of times - if it stops leaking, chances are it's the needle valve sticking. Worth taking it out & cleaning it & it's seat in the carb before replacement. If your lucky, you can get the float bowls off without removing the carbs! Some people have also had problems with the brass overflow tube in the float bowl corroding & leaking, plus, I suppose a hole in the float is also a possibility! |
|
|
|
Post by dominykaslt on Sept 14, 2014 14:23:31 GMT
Thank you for the thorough response, but the link says "You do not have permission to access this thread."
|
|
stevegbr
Administrator 
ADMIN
BIRMINGHAM
Posts: 10,411
mini-profile background: {"image":"","color":"2b86e7"}
|
Post by stevegbr on Sept 14, 2014 14:32:35 GMT
Thank you for the thorough response, but the link says "You do not have permission to access this thread." you need to get your post up to 20, it should not take you long, answer a few questions, a write up on your bike etc.  |
|
