stevegbr
Administrator 
ADMIN
BIRMINGHAM
Posts: 10,359
mini-profile background: {"image":"","color":"2b86e7"}
|
Post by stevegbr on Jan 31, 2022 18:02:41 GMT
|
|
|
|
Post by diydarren on May 26, 2022 13:48:23 GMT
Afternoon all, I am looking for some help with Brake bleeding. I have recently replaced the seal and pistons in both calipers, installed new brake hoses and a new master cylinder, but cannot seem to bleed the brakes for love nor money.
Conventional Bleeding just didn't seem to work. So, I have tried using a vacuum pump, but no joy. This morning i tried reverse bleeding, but couldn't seem to pump the fluid in.
At the moment the only fluid i can seem to get into the system is what is sitting in the Master Cylinder.
Anyone have any ideas or things they have found to work ?
|
|
stevegbr
Administrator
ADMIN
BIRMINGHAM
Posts: 10,359
mini-profile background: {"image":"","color":"2b86e7"}
|
Post by stevegbr on May 26, 2022 14:27:55 GMT
Afternoon, I am looking for some help with brake bleeding. can you do a post of what you have done, and problems you are facing. |
|
|
|
Post by diydarren on May 26, 2022 14:46:44 GMT
See above, I have edited the original post.
|
|
|
|
Post by na44superdream on May 26, 2022 15:00:39 GMT
So the cap is off the master cylinder, are you getting air bubbles coming up through the fluid, as you slowly operate the lever?
|
|
|
|
Post by diydarren on May 26, 2022 15:22:15 GMT
There were a few very small ones
|
|
