|
|
Post by speedfroy on May 28, 2014 16:59:39 GMT
Guys, basic question.. but it is not crystal clear in the workshop manual.. the washer that goes on the speedo side of the spinal ( cb250n ) ,whixh side of the fork does it go? Next to the castle nut or next to the speedo itself?
|
|
|
|
Post by speedfroy on May 28, 2014 17:00:42 GMT
Spindle.. not spinal.
|
|
stevegbr
Administrator 
ADMIN
BIRMINGHAM
Posts: 10,417
mini-profile background: {"image":"","color":"2b86e7"}
|
Post by stevegbr on May 28, 2014 17:10:31 GMT
hello and welcome to the forum speedfroy, here is a diagram, hope this helps.  |
|
|
|
Post by na44superdream on May 28, 2014 18:22:15 GMT
The washer (15) fits in the outboard recess in the alloy fork bottom, next to the castle nut. the whole set-up is tightened up to the left fork bottom, then clamped on the right.
|
|
|
|
Post by speedfroy on May 28, 2014 18:26:35 GMT
Thanks for the diagram, still not sure what side the washer goes.. I am assuming it goes on the castle side of the fork.. but it could also be used as a spacer for the speedo.
|
|
|
|
Post by speedfroy on May 28, 2014 18:28:49 GMT
Thanks NA44... thats what I was assuming.
|
|
|
|
Post by na44superdream on May 28, 2014 18:29:45 GMT
Not a spacer, it stops your castle nut grinding when tightening, and spreads the spindle load on your fork bottom outer face.
|
|
|
|
Post by na44superdream on May 28, 2014 18:31:18 GMT
Thanks NA44... thats what I was assuming. Great, photos when finished  ? |
|
|
|
Post by rich on May 31, 2014 9:11:21 GMT
aint cmsnl great, a visual manual with stock levels part numbers and prices..........  a bible with no text........
|
|
?
a bible with no text........