|
|
Post by buster on Apr 6, 2020 10:33:29 GMT
I would take one of the con rods off and see if really good daylight reveals anything. the only other thing I could suggest (if no number is present) is taking it to somewhere with really good (properly calibrated) measuring gear and see if they can tell you the internal diameter of the con rods big end. the measurements are given in the tables in the manual
|
|
|
|
Post by andy63 on Apr 6, 2020 10:35:46 GMT
Thankyou Buster for the great pics and help with identifying the bearings I need. I posted a couple of pictures of the crank and the gearbox casing. I still can't find any marks on either conn rod. I looked t your picture and looked again at the conn rods but there's not markings to be found. Are the marks stamped into the metal? If so, they should be there. Confused!
I just read your reply. Thank you!!! I may have to get the conn rods measured. I will look again to see if there are any marks but I've looked at all the surfaces under a magnifying glass. Thank you again for your help. Just brilliant and so generous of you. The people on here are amazing and I'm glad I found this fantastic forum.
|
|
