|
Post by kickstart on Feb 9, 2015 19:16:51 GMT
Could be the generator, mine had a weak spark and died. The genny was the problem with mine so I swapped for another and that cured it. Thats one thing iv noticed on my superdream one side seems to have a good ish spark but the other is quite weak. I changed coil and cdi off a good running sd but still the same. How do you remove/ service the generator?? The generator/stator as to be rewound,by a specialist but to replace is,nt too difficult with care , you need a genny/stator removal,bolt (stevegbr sells them on here )1,disconnect gear,change linkage from gear change shaft . 2, remove generator cover . 3,Unbolt,the generator flywheel ,I got wife to hold this with a ratchet belt while I loosened the centre bolt as you need to hold flywheel still, I marked the position of flywheel so that it went back on in same position , was,nt sure if this was necessary but did it anyhow . 4,Once bolt os out screw in the flywheel removal bolt to pull flywheel off the shaft . 5,Unscrew 2 bolts to take off the ignition capacitor and finally the 3 large screws to take off the genny/stator ..... And that's it the only problem I had was holding the flywheel still ,but with care the bolt came off eventually , hope this helps
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 9, 2015 19:17:11 GMT
Paul was my friend once but I did a cull around two years ago - I chopped him up without meaning to.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 9, 2015 19:17:39 GMT
(And Bob as well).....
|
|
|
Post by kickstart on Feb 9, 2015 19:20:49 GMT
I,ll sort my face book settings , I,ve been having problems logging in to Facebook on anything but my phone , does,nt recognise my email address !!!!
|
|
terryc
Forum Accommodation Specialist
I'll put you up ,plenty of room in my box
Posts: 5,307
mini-profile background: {"image":"","color":"29908d"}
|
Post by terryc on Feb 9, 2015 19:28:07 GMT
Yeh it works for me too
|
|
|
Post by kickstart on Feb 9, 2015 19:32:55 GMT
Yes Steve that's the one ....
|
|
|
Post by wrighty on Feb 9, 2015 21:21:05 GMT
Thats one thing iv noticed on my superdream one side seems to have a good ish spark but the other is quite weak. I changed coil and cdi off a good running sd but still the same. How do you remove/ service the generator?? The generator/stator as to be rewound,by a specialist but to replace is,nt too difficult with care , you need a genny/stator removal,bolt (stevegbr sells them on here )1,disconnect gear,change linkage from gear change shaft . 2, remove generator cover . 3,Unbolt,the generator flywheel ,I got wife to hold this with a ratchet belt while I loosened the centre bolt as you need to hold flywheel still, I marked the position of flywheel so that it went back on in same position , was,nt sure if this was necessary but did it anyhow . 4,Once bolt os out screw in the flywheel removal bolt to pull flywheel off the shaft . 5,Unscrew 2 bolts to take off the ignition capacitor and finally the 3 large screws to take off the genny/stator ..... And that's it the only problem I had was holding the flywheel still ,but with care the bolt came off eventually , hope this helps Excellent thank you
|
|