|
|
Post by rarebear on Aug 7, 2024 12:07:11 GMT
Hello everyone, I am looking for the Honda stickers you see in the first photo. I only found these images online (photo 2 and 3), but they have a gray upper stripe instead of white. I am trying to modify the files to make them vector, but the measurements are missing. Does anyone have these images in the exact scale for printing? Thank you. ibb.co/PwwBr7Ribb.co/G2b7F7kibb.co/df9cYF1 |
|
|
|
Post by na44superdream on Aug 10, 2024 14:51:36 GMT
I can't get the photo to load
|
|
|
|
Post by rarebear on Aug 11, 2024 8:08:01 GMT
I can't get the photo to load i try re upload photo thank you    |
|
|
|
Post by na44superdream on Aug 11, 2024 8:35:34 GMT
The picture is a custom ND concept or actual by a European dealer. It looks good note the apparently black, grab rails.
The dark blue lower colour has been substituted for a probably slightly off white.
I will try and get the dimensions when I get back home later today or it might be tomorrow afternoon.
|
|
|
|
Post by na44superdream on Aug 11, 2024 23:15:37 GMT
ND Tank stripe Dims check notes  |
|
|
|
Post by na44superdream on Aug 11, 2024 23:34:34 GMT
|
|
|
|
Post by rarebear on Aug 12, 2024 7:42:47 GMT
|
|
|
|
Post by rarebear on Aug 12, 2024 8:01:33 GMT
When possible, could you also provide the measurements for the side panels and the tail section? Thank you very much. When you have the time, if you can, and you want to give it a try to change color blu for match with white in photo.....i would be immensely grateful.  |
|
|
|
Post by na44superdream on Aug 12, 2024 8:49:48 GMT
Yes I can edit it in GIMP, also noticed a slight variation on the centre line width of the tail cowl that need recheck against the original scan.
Will we go for an approximation of tanzinite blue for the centre pin stripe or maybe the later NC blue, I'll see what sample I can find...it wont be a candy on the decal in any case.
Lack of time is my issue at the moment, for this week at least.
|
|
|
|
Post by rarebear on Aug 12, 2024 10:52:57 GMT
Yes I can edit it in GIMP, also noticed a slight variation on the centre line width of the tail cowl that need recheck against the original scan. Will we go for an approximation of tanzinite blue for the centre pin stripe or maybe the later NC blue, I'll see what sample I can find...it wont be a candy on the decal in any case. Lack of time is my issue at the moment, for this week at least Thank you very much again; of course, whenever you can, considering your commitments. Actually, my tail cowl is the lower one, without the wings, but I think these decals will still work fine. This is my second bike; the first one is gray with the classic blue decals (like in your avatar) and the higher tail cowl. |
|
|
|
Post by na44superdream on Aug 12, 2024 16:03:44 GMT
Is your tank the later on with the knee indents, as the earlier tank is a different shape / size.
|
|
|
|
Post by rarebear on Aug 13, 2024 6:47:21 GMT
My first tank, the gray one with the blue stripe, has the knee recesses; this one I'm doing in blue, as shown in the photo, is smooth without knee recesses.
|
|
|
|
Post by rarebear on Aug 13, 2024 8:56:09 GMT
After hours and hours of work, I managed to modify the file with the bottom white stripe. I also resized the entire design according to the measurements you provided with the image above (if all the pieces are to scale, it was enough to group all the elements and measure the ones you gave measurements for). Here’s the result below. Could you take a look and confirm the measurements? Keep in mind that my tank doesn’t have knee indentations. fileport.io/LKgyeQGnpqPB |
|
|
|
Post by na44superdream on Aug 13, 2024 12:28:37 GMT
I'm on a train, can't compare much;
CB400N font height may be 25mm compared with earlier side emblems at 28mm
Need to check the upper blue at the rear of the tank, earlier tank has a shallower angle than the latter.
The tank stripe would need a cheap trial print and physically check where the upper curve back stripe ends up.
Judging by the earlier 250 strip, the tank strip would need scaled 59/60 in the horizontal / longitudinal,
(All doable on windy rainy days)
Almost at Edinburgh, have to go...
|
|
|
|
Post by rarebear on Aug 13, 2024 12:59:55 GMT
Thank you so much for the advice. Have a great vacation if you’re on holiday. Otherwise, enjoy whatever you're doing  |
|
