|
Post by Graeme on Aug 4, 2021 16:05:08 GMT
Me again, on a roll here.
How easy is it to convert a NA engine to a Kicker engine.
I have ordered a kicker casing and now found a lower crank in my shed with the mechanism attached, if its an easy enough job?
Any advice guys.
Cheers. Gee.
|
|
|
Post by buster on Aug 4, 2021 18:02:31 GMT
depends where your at mechanically, it involves splitting the crankcase halves, I dont think its any big deal but others might not want to tackle it. worth checking the number of teeth on the cog at the end of the kickstart shaft to see if its for a 5 speed or 6 speed box
|
|
|
Post by Graeme on Aug 4, 2021 19:05:44 GMT
depends where your at mechanically, it involves splitting the crankcase halves, I dont think its any big deal but others might not want to tackle it. worth checking the number of teeth on the cog at the end of the kickstart shaft to see if its for a 5 speed or 6 speed box Way above my paygrade, the crank is split on this one that I found in my shed, almost 100% sure its a SD and not a Dream. Splitting the crank answers my Q, thank you for that. Gee.
|
|