|
Post by duffer on Dec 24, 2019 6:40:04 GMT
It's not all good news. Have you seen the replacement costs should you have a bit of cleaning done off site ?
|
|
|
Post by buster on Jan 19, 2020 11:09:47 GMT
picked this up on german ebay and the more I look at it the more unsure I get about wether its the real thing, all thoughts appreciated
|
|
|
Post by BritPete on Jan 19, 2020 11:26:53 GMT
Measurements from my German 400
Rivers on left centre to centre 90 mm
Mounting bolt centre to mudguard edge 105mm
|
|
|
Post by BritPete on Jan 19, 2020 11:27:29 GMT
Measurements from my German 400 Rivers on left centre to centre 90 mm Mounting bolt centre to mudguard edge 105mm That should have said rivets
|
|
|
Post by buster on Jan 19, 2020 14:38:37 GMT
Measurements from my German 400 Rivers on left centre to centre 90 mm Mounting bolt centre to mudguard edge 105mm That should have said rivets its ok I read through it that fast I read it as rivets anyway , cheers for the info pete
|
|
|
Post by bodie on Jan 19, 2020 17:43:10 GMT
its not a honda SD muddy I think buster its got no rolled edge around it this is SD one
my cx and Kerry's 500/4 both have rolled edges
|
|
|
Post by bodie on Jan 19, 2020 18:04:17 GMT
probably cm 250/400 buster
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 19, 2020 18:08:33 GMT
Looks like a CM guard.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 19, 2020 18:09:06 GMT
As per the Bodester
|
|
|
Post by buster on Jan 19, 2020 18:34:08 GMT
probably cm 250/400 buster yep, its the missing rolled edge that raised my suspicions, but thanks for confirming. if it sits ok then its one of those compromises that I'll live with for the time being as I think its nicer than the square ones from silvers.
|
|
|
Post by buster on Jan 19, 2020 18:42:01 GMT
the other thought that did occur to me is that a lot of the german listings are cb400n-t (in the same way a lot of uk listings are cb250n/cb400n) so wondered if its possibly off an earlier t model. but if the t model also has the rolled edge then I'm sure you gents are right with cm
|
|
|
Post by BritPete on Jan 19, 2020 18:43:59 GMT
the other thought that did occur to me is that a lot of the german listings are cb400n-t (in the same way a lot of uk listings are cb250n/cb400n) so wondered if its possibly off an earlier t model. but if the t model also has the rolled edge then I'm sure you gents are right with cm The muddy is the same
|
|
|
Post by BritPete on Jan 19, 2020 18:44:41 GMT
probably cm 250/400 buster yep, its the missing rolled edge that raised my suspicions, but thanks for confirming. if it sits ok then its one of those compromises that I'll live with for the time being as I think its nicer than the square ones from silvers. Here here - 100% agree
|
|
|
Post by buster on Jan 19, 2020 18:48:55 GMT
the other thought that did occur to me is that a lot of the german listings are cb400n-t (in the same way a lot of uk listings are cb250n/cb400n) so wondered if its possibly off an earlier t model. but if the t model also has the rolled edge then I'm sure you gents are right with cm The muddy is the same good to know, cheers pete. theres going to be one highly upset german seller if he reads this , its just not in their nature to make mistakes, but I dont mind I gave £57 for it, the silvers square ones are £42 plus postage
|
|
|
Post by BritPete on Jan 19, 2020 19:00:09 GMT
good to know, cheers pete. theres going to be one highly upset german seller if he reads this , its just not in their nature to make mistakes, but I dont mind I gave £57 for it, the silvers square ones are £42 plus postage I love The German used spares so much better than UK ones. Trying to find a good set of German handle bars for SME as I like the additional height but not found a set yet.
|
|