Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 28, 2018 20:52:05 GMT
Of course. Well done.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 29, 2018 13:07:29 GMT
|
|
|
|
Post by wazzbo on Jul 29, 2018 13:08:47 GMT
the metal plates bolted on to the underside of the riders footrests. ( mine have worn off with the extreme lean angle needed on the red bikes when cornering at supersonic speed)
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 29, 2018 13:15:38 GMT
Just wet myself from all the lolling. Well done though. Next:  |
|
|
|
Post by wazzbo on Jul 29, 2018 13:21:33 GMT
clutch push rod 22847-413-000
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 29, 2018 13:29:24 GMT
Correct Dave. Neggst up:  |
|
|
|
Post by BritPete on Jul 29, 2018 13:40:54 GMT
Bolt to hold the chain guard on
|
|
|
|
Post by BritPete on Jul 29, 2018 13:41:53 GMT
Bolt for master cylinder clamp
|
|
|
|
Post by wazzbo on Jul 29, 2018 13:53:13 GMT
bolts the drive sprocket for the oil pump onto the crankshaft end
|
|
|
|
Post by wazzbo on Jul 29, 2018 13:55:51 GMT
its a high tensile bolt if I remember correctly, m 12x25
part number 90019-413-000
Torque 33 -36 lbs-ft
i`m getting bored now  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 29, 2018 14:44:35 GMT
Yes bang on Dave.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 29, 2018 14:44:58 GMT
|
|
|
|
Post by wazzbo on Jul 29, 2018 14:50:50 GMT
footrest clevis pin, pillion rest
|
|
|
|
Post by wazzbo on Jul 29, 2018 14:53:25 GMT
not rear, front I think
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 29, 2018 14:58:49 GMT
|
|
